Products > Crowd Funded Projects

Fluxlamp-DIY焊接回流炉项目

<< < (3/3)

纳斯特 :
感谢您的反馈! 是的,尺寸(使其紧凑)和低成本但有效是FluxLamp的主要考虑因素,但我绝对同意拥有其他一些选择(例如气相冷凝版本)将是很棒的。 我想我没有 ' 上面没有很好地解释这一点,但我当时正在考虑制作控制板( ' m称为可通过众筹活动获得的PowerCore。 这个想法是使人们能够通过提供软件和构建指南以及控制板(但BYO灯)来构建FluxLamp之类的东西。 为此,探索气相冷凝回流炉也可能是有意义的。 我认为这会贵得多,但是 "level up" 对于那些想要它的人。

One thing I was wondering about vapor phase condensation -- it seems like a good heat transfer dielectric medium with specific boiling temp is necessary. Does anyone know if something like Galden HT-230 is available or can be made in smaller quantities (and preferably from a local supplier like a big box retail store)? It would need to be equally safe & biologically inert. If the dielectric were available (for wayyy less than $1k), it would be reasonable to build a unit like //hackaday.com/2010/10/15/vapor-phase-reflow-soldering/, controlled by the PowerCore .

s崎 :
Sources:

//github.com/dasaki/nanoReflowController

//www.163115.com/forum/manufacture/could-this-be-the-smallest-and-cheapest-ir-reflow-oven/

导航

[0] 讯息索引

[*] 上一页

感谢时出现错误
谢谢...
转到完整版